Muratec MFX-C2700 Manuel d'utilisateur télécharger pdf (Page 112)

Installing upgrades > 112

5. Notice that the memory board has a small cutout in the edge connector, which is

closer to one end than the other.

6. Identify the RAM expansion slot in the printer.

7. If the RAM expansion slot already contains a memory upgrade board, that board will

have to be removed before you can install the new one. To remove it, proceed as

follows, otherwise skip to step 8.

(a) Release retaining clips and pull the board out of the slot.

(b) Place the removed memory board in the antistatic bag which originally

contained the new memory board.

8. Hold the new memory board by its short edges, so that the edge connector faces in

towards the RAM expansion slot, and the small cutout is closer to the rear of the

printer.

9. Gently push the board into the RAM expansion slot until it latches in and will not go

any further.

10. Replace the inner access cover (b) and turn locking screw (a) clockwise to secure it

shut.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 165 166

Pas de commentaire

Muratec MFX-C2700 Manuel d'utilisateur Page 112